-40%

Kingfisher KI6354 Visible Fault Locator

$ 50.16

Availability: 33 in stock
  • model: Kingfisher KI6354 Visible Fault Locator
  • Brand: Kingfisher
  • MPN: KI6354
  • Condition: To be tested prior to shipment (Cal & ext warranty available upon request)

    Description

    Kingfisher KI6354 Visible Fault Locator
    Item
    Make: Kingfisher
    Model: KI6354
    Item Specifics/Condition
    To be tested prior to shipment (Cal & ext warranty available upon request)
    Description
    Visible Fault Locator
    Visible Fault Locator
    Safety:
    The KI6354 emits visible laser light in the wavelength range of 650-660 nm.
    The maximum optical output power is less than 1 mW so that the device
    meets laser Class 1(IEC 60825-2:2011) power specifications. During
    normal operation, the laser light is not dangerous, but we still recommend
    that you do not look directly into the laser output or into the end of a fiber
    connected to the fault locator.
    Application:
    The KI6354 is suitable for performing continuity checks and locating faults
    on singlemode and multimode optical fibers and components. A range of
    more than 5 km can be achieved in certain cases. A single universal adapter
    provides matching to all standard 2.5 mm optical fiber connector systems.
    The battery lifetime in blink mode is approx 40 hours for alkaline batteries.
    Operation:
    The instrument can be switched on or off by depressing the black button
    near the optical adapter for 2 seconds. With the same button the operator
    can select between a continuous light mode and a flash mode with approx
    3 Hz. The KI6354 is equipped with a dust cap. Remove the cap when using
    the device. Replace the cap after use to protect the optical adapter. The
    optical connector must be inserted all the way into the adapter.
    Changing batteries:
    To open the instrument, unscrew the pushbutton. Remove the batteries
    and replace with new ones (2x 1.5v-AAA) then reattach the pushbutton.
    For correct polarity the positive (+) poles of the batteries should point
    towards the laser. We recommend using AIMn batteries. Please remove
    batteries if device is not going to be used for long period of time.
    Images
    Term of sale
    Included Items:
    This sale does not include probes, cables, manuals,power cords or any other accessories unless otherwise stated or pictured.