Titanzinkblech 0.55mm-1mm Titanium Zinc Plates Sheet Zinc 100 MM To 1000 MM

Description

Titanium zinc sheet 0.55mm-1mm titanium zinc sheets Zinc sheets 100 mm to 1000 mm
Titanium zinc sheet 0.55mm-1mm titanium zinc sheets Zinc sheets 100 mm to 1000 mm
Dimension tolerances: thickness ± 0.025 mm, width ± 2 mm, length ± 2 mm
TOP quality at fair prices
High quality, made-to-measure and cut-to-size products
Competent advice & service
Technical specifications:
Brand:
Evek
Manufacturer number:
Not applicable
Type:
sheet
Material:
Titanium zinc
Operation area:
Roofing; Roof drainage (gutters, downpipes); Facade cladding
Standard classifications:
Quality standard:
din EN 988
Purity grade Zn:
din EN 1179
Additional Information:
Density:
7.2 g / cm³
Melting point:
418 ° C
Tensile strenght:
min. 150 N / mm²
Yield strength:
min. 110 N / mm²
Expansion coefficient:
0.022 mm / (mK)
Elongation at break:
min 40%
Thermal conductivity:
97 W / (m⋅K)
Surface:
bright-rolled
Description:
Titanium zinc is an alloy of zinc and small additions of titanium and copper. The mass fraction of zinc is approx. 99.995%, on copper - at about 0.08-0.17% and on titanium - at about 0.07-0.12%. In contrast to pure zinc, the material has increased tensile strength and fatigue strength. The titanium zinc sheet has very good processing properties and is corrosion-resistant. It is also environmentally friendly, completely recyclable and has a long service life. The titanium zinc sheet is produced in accordance din EN 988.
Titanium zinc sheet is widely used in construction. The main uses of titanium zinc are:
Roofing;
Roof drainage (gutters, downpipes);
Facade cladding.
Titanium zinc sheet is characterized by the following features:
excellent corrosion resistance;
very good processing properties;
Environmental compatibility;
Recyclability;
long lifetime.
documentation
Datasheet (German)
b - width
I - length
Listing and template services provided by inkFrog
Titanium zinc sheet 0.55mm-1mm titanium zinc sheets Zinc sheets 100 mm to 1000 mm Titanium zinc sheet 0.55mm-1mm titanium zinc sheets Zinc sheets 100 mm to 1000 mm Dimension tolerances: thickness ± 0.025 mm, width ± 2 mm, length ± 2 mm Titanium zinc is an alloy of zinc and small additions of titanium and copper. The mass fraction of zinc is approx. 99.995%, on copper - at about 0.08-0.17% and on titanium - at about 0.07-0.12%. In contrast to pure zinc, the material has increased tensile strength and fatigue strength. The titanium zinc sheet has very good processing properties and is corrosion-resistant. It is also environmentally friendly, completely recyclable and has a long service life. The titanium zinc sheet is produced in accordance din EN 988. Titanium zinc sheet is widely used in c